Siemens ET 200SP Manual page 117

Configuring/address space
4.6 PWM with DC motor motor
Parameters of the TM Pulse 2x24V in "PWM with DC motor" mode
The default settings of the parameters are shown in bold in the "Value range" column.
Table 4- 16
Channel configuration
Group diagnostics
Diagnostics DQA
Diagnostics DQB
Function DI
Input delay for digital inputs
Period duration
Actual period duration
On delay for pulse output
When configuring with HSP for STEP 7 or with a GSD file, you define the channel configuration by
1
the selection of the module name.
Note
PROFIBUS GSD configuration
When configuring with a PROFIBUS GSD file, the possible parameter assignments are not
available. The parameters are preassigned in the module with the default setting. Set the
"PWM with DC motor" mode and the further parameters in the user program using data
record 128.
116
Adjustable parameters
Parameter
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100...1000...85000000 μs
Automatically calculated (read-only)
0...85000000 μs
Value range
2 channels (2 A)
1 channel (4 A)
Deactivated
Activated
Deactivated
Activated
Deactivated
Activated
Input
HW enable
Limit switch
None
0.05 ms
0.1 ms
0.4 ms
0.8 ms
1.6 ms
3.2 ms
12.8 ms
20 ms
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Scope
Module
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Manual, 05/2019, A5E35061186-AB