Installing
3.2 Safety instructions for installation
Note
Air circulation
Make sure that there is no build up of heat at the installation location. Make sure that sufficient
air circulates around the rack-mounted device.
Do not cover the ventilation slit.
If you install more than one rack-mounted device, maintain a clearance of one height unit (4.4
cm) to the next device.
3.2.2
Wall-mounted device
Note
When installing wall-mounted device make sure it weather protected.
Protect the wall-mounted device from:
● Direct thermal radiation
● Mechanical damage
● Vibration
Note
Air circulation
Make sure that there is no build up of heat at the installation location. Make sure that there is
an adequate circulation of air around the wall-mounted device.
If you are installing more than one wall-mounted device, there should be a clearance of ≥ 5 cm
between the sides of the devices.
32
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02