Hitachi HF-W100E Instruction Manual page 93

3.2.1.4 Internet Explorer 11 setup procedure
The shipment state of the Windows® Embedded Standard 7 preinstalled model is in the
state that Internet Explorer 8 is installed to ensure compatibility with our conventional model.
Microsoft support for Internet Explorer 8 in Windows® Embedded Standard 7 has been
discontinued on January 12, 2016. Therefore, perform the following procedure to upgrade
Internet Explorer 8 to Internet Explorer 11.
< NOTE >
・To install the Internet Explorer 11 in a language other than English and
Japanese, you need a recovery DVD and a DVD drive with USB connection.
Prepare before starting work.
1. If you are using Internet Explorer 11 in a language other than English and Japanese,
connect the DVD drive to the equipment.
2. If you have not logged on with the computer's administrator account, log on to the
computer with the computer's administrator account.
3. Close all running applications.
4. Activate the command prompt of administrator authority.
・Click Start and point to All Programs.
・Click Accessories.
・Right-click Command Prompt to show a menu. On the menu, click Run as
administrator.
(If the administrator account you used for log on is a built-in administrator account,
simply click Command Prompt.)
・If you see the User Account Control window, click Yes.
5. Type the following character string in the command prompt, and then press the Enter
key.
C:\HITACHI\IE11\Preparation.bat
6. The following message appears and installation of the update program necessary for
installing Internet Explorer 11 starts.
Please wait.
Installing Windows Update for IE11: 1 of 9. (This message is displayed until "9 of 9"
is shown.)
7. When the update program has been installed, the following message appears to prompt
restart. Enter y to restart the system.
Please restart system.
Are you sure you want to restart now?[y/n]
3-13
3. SETUP