Chapter 3 Setup; Setup Procedure When You Turn On The Power For The First Time; Setting Up Windows® Embedded Standard 7 - Hitachi HF-W100E Instruction Manual

CHAPTER 3 SETUP

3.1 Setup Procedure when You Turn on the Power for the First Time

3.1.1 Setting up Windows® Embedded Standard 7
This section describes the procedure for setting up the preinstalled Windows® Embedded
Standard 7.
• Set basic items of Windows® Embedded Standard 7.
• The RAS function is automatically set up.
• This setup procedure takes about 20 minutes.
●
Preparation for setup
The following items are required during the setup procedure. Prepare (check) them in advance
before starting the setup procedure.
Item
License certificate
User name
Password
Computer name
Confirm that the license certificate is attached to the body of this
computer.
User name of the computer administrator account
You can later change it in Control Panel.
The password for the user name.
You can later change it in Control Panel.
The name used for identifying the computer on the network.
・This name is used for identify the computer on the network.
Select a unique name on the network.
You can later change it in Control Panel.
3-1
Description
3. SETUP