Hitachi HF-W100E Instruction Manual page 15

SAFETY INSTRUCTIONS (Continued)
2.2 Safety Warning Indicated as "
 If you keep at high temperature this equipment, do not touch bare hands.
Otherwise you may result burns.
 Make sure to install this equipment on the vertical mounting bracket with fasten
screw, when you use this equipment in a vertical orientation. If you not, injury may
result due to fall or fall down the equipment
 Make sure to confirm the installation work has been done securely. Injury may
result due to drop the equipment since installing failure or loosing screw.
 When procuring a AC power cable, make sure that the cable has proper rating
and meets local safety requirements whatever applicable. Otherwise, an electric
shock or machine failure may result.
 Before you start the work, make sure you shut down the OS, unplug the power
cable from the outlet, and wait for at least one minute. Otherwise, an electric
shock or failure of the equipment may result.
 Do not touch the equipment directly with bare hands during work. Injury of burn
may result due to getting hot of the equipment.
 When you install or remove a CFast card, make sure you do not cut your fingers
on the protrusions.
 When you install or remove a USB cable, make sure you do not cut your fingers
on the protrusions.
 When you install or remove a DisplayPort cable, make sure you do not cut your
fingers on the protrusions.
CAUTION"
S-7
(Page 1-8)
(Page 1-11)
(Page 1-16)
(Page 6-3)
(Page 6-4)
(Page 6-6)
(Page 6-9)