Hitachi HF-W100E Instruction Manual page 134

5. SPECIFICATION
(*1) The "xx" denotes the OS type. For details about OS types, see " (2) Pre-installed OS model
specifications". If "xx" is "NO", an OS is not installed.
Depending on the language of the OS, MUI (Multilingual User Interface). A language
supporting in MUI is English, Korean, Portuguese, Thai, Chinese (China).
(*2) For information about the precautions for mSATA SSD, see "PRECAUTIONS 4. MINI
SERIAL ATA SOLID STATE DRIVES (mSATA SSDs)".
For details of partition configuration, see "5.1 Equipment Specification (3) Partition
configuration".
(*3) By using a conversion connector or DVI-A cable, you can output an analog VGA signal. The
conversion connector or DVI-A cable must be provided by the users.
(*4) At the LAN port, only two ports may be set to EtherCAT by default. See "1.4 Name and
Function of Each Part (1) Front view")
(*5) It is the specification of the AC adapter.
(2) Pre-installed OS model
OS type
PA Microsoft® Windows® 10 IoT Enterprise
PB Microsoft® Windows® 10 IoT Enterprise
PF Microsoft® Windows® 10 IoT Enterprise
PG Microsoft® Windows® Embedded Standard 7 SP1 (64bit) + Softmotion
PH Microsoft® Windows® Embedded Standard 7 SP1 (64bit)+ Softmotion + CNC
PL Microsoft® Windows® Embedded Standard 7 SP1 (64bit)
(3) Partition configuration
The partition configuration in the OS preinstalled model of this equipment is as follows.
In addition to the boot partition (C :) where Windows® is installed, two partitions are
arranged.
Drive
C:
G:
H:
・Application data storage partition
Please use as a storage area of the application data (logs etc.). In particular, you can use it
as a writing area when using the filter feature of Embedded Enabling Features(EEF). For
details on the Embedded Enabling Features, see "4.1 Embedded Enabling Features of
Windows® Embedded Standard 7".
・Fault analysis information partition
It is arranged as an area for storing information necessary for failure analysis such as
Windows® event logs and minimum memory dump file, and it is set mount settings.
Therefore, do not change the drive letter or write to this area. For the mount setting, see
"9.6 Failure Analysis Information Partition Mount Setting".
Pre-installed OS + Software
Boot partition
Windows® Embedded Standard 7
Windows® 10
Application data storage partition
Fault analysis information partition
(64bit) (Embedded) + Softmotion
2016 LTSB
(64bit) (Embedded) + Softmotion + CNC
2016 LTSB
(64bit) (Embedded)
2016 LTSB
Use
5-2
Capacity
28GB
27.5GB
1GB
About 700MB