GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 45

Unpacking
Exercise care when unpacking the control valve and its mounted accessories. The ValVue
software is downloadable from
Figure 18 shows the unit tag that comes attached to the unit.
The tag lists the following items:
ID: Unique factory-set identifier for the
device.
Factory Node Address: Lists the factory-set
field bus node address.
Device Type: A four digit code.
Communications: Lists the protocol in use.
Pneumatic Train: Single Acting or Double
Acting.
Display: Indicates whether the LED display
and pushbuttons are installed.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
https://valves.bhge.com/resource-center.
Figure 18 Unit Tag
Tag: User-defined. This can be changed for
the specific application.
Device Manufacturer: The six digits comprise
the first part of the ID and Tag. Used to iden-
tify the DD.
Device and Minimum DD Revision: Represents
the original firmware revision flashed during
manufacture. This DD may have been
upgraded since installation.
Diagnostics: Lists the level of diagnostics with
which the device was shipped. This may have
been upgraded since installation.
Pneumatic Flow: Standard Flow or High Flow.
Housing: Aluminum only.
Masoneilan SVI FF Instruction Manual
| 45
=