View Error Menu - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

VIEW ERROR Menu

Use the VIEW ERROR menu to view actuator and pressure errors.
Table 30 lists the fault codes and messages that appear on the display and explains the
message meaning and possible causes.
Error messages depend on the device status and can vary for different devices.
Categories include:
Failsafe: the valve is non-operational.
Warning: the alert is annunciated; the valve may become non-operational.
Logonly: informational; to support further analysis of valve condition.
Display
Message
RESET Reset occurred due to command or power up.
Always present after power up.
ACTUATOR Positioner unable to position a valve normally
142 |
BHGE
VIEW
ERROR
*
ACT
ERROR
*
AIR WARN
+
BACK
Figure 61 VIEW ERROR Menu
Table 30 Error Messages
Description
*
Category
Logonly Normal operation
on power up
always sets RESET.
Use CLEAR ERR to
remove warning.
Warning Low pressure or
obstacle
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Cause Byte_
Bit
0_0
0_2