GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 192

Parameter (in bold)
Sub-parameter (Index)
RELAY_TYPE (5)
SUPPLY_PRS_MAX (6)
PRS_CONTROL_HI (7)
PRS_CONTROL_LO (8)
ACTUATOR_INFO (105)
DESCRIPTOR (1)
MESSAGE (2)
DATE (3)
SPEC_SHEET (4)
VALVE_
IDENTIFICATION (1006)
VALVE_MAN_ID
VALVE_MODEL_NUM
VALVE_SN
VALVE_SERVICE (107)
SERVICE
PID_No
VALVE_BODY_1 (108)
192 |
BHGE
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
See 1 Auto,
Descrip- Man,
tion OOS
Range is
not
important
NA
NA 103.4
NA 20.6
Auto,
Man,
OOS
Auto,
Man,
OOS
Water
Auto,
Man,
OOS
Description
Relay Type:
1.= Standard Relay: Double or Single Acting.
2=High Capacity: Single Acting.
Maximum supply pressure for the actuator.
Maximum supply pressure for the actuator in control - it
should be the same as Bench Range.
Minimum Supply Pressure for the actuator in control - it
should be the same as Bench Range.
Information about the valve identification.
The valve manufacturer identification.
The valve model number.
The valve serial number.
Valve service information.
Valve service information.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.