Hand Held Communicator - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Hand Held Communicator

For communication to an FF device, there is a Device Description Language. A Device
Description, DD, is published by registration with the Foundation Fieldbus Foundation. When
the DD is installed in a host communication device then the host can readily access all the
information in the smart field device. The SVI FF DD can be obtained from the website or by
contacting your local representative.
WARNING
CAUTION
CAUTION
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Do not connect a PC or FF to an intrinsically safe circuit except on
the safe area side of the barrier. Do not operate a PC in a
hazardous area without compliance to local and plant
regulations.
Do not connect an FF setup modem and PC to a control circuit
unless the controller is FF compatible or has a filter. Loss of control
or a process upset may occur if the controller output circuit is not
compatible with the signal.
Once finished with any DD-based configuration you must return to
Normal mode, Use the APP_MODE command to do this from the DD. See
N "Changing Out of LO Mode" on page 251.
Masoneilan SVI FF Instruction Manual
| 131
=