Mitsubishi Electric MELSEC iQ-R Series User Manual page 78

■[General] tab
Set items such as the name and device number of the EtherNet/IP device.
Item
Device Designation
Network Properties
3 EtherNet/IP Configuration Tool
76
3.1 Window Structure
Description
Device Name Sets the name to use in management with EtherNet/IP
Configuration Tool.
By default, names of EtherNet/IP devices not registered in the
network configuration setting are displayed in the form such as
"DEVICE-A" and "DEVICE-B".
Number Sets the control number of the EtherNet/IP device.
The control number that has not been set for EtherNet/IP devices
can be selected from the list.
Link Parameters Enables or disables the link between the IP address and the
device number of the EtherNet/IP device.
• Selected: Enabled
• Not selected: Disabled
Enable this item to link the device number of the EtherNet/IP
device to the fourth octet of the IP address.
Active Configuration Enables or disables the parameters set for the EtherNet/IP device
on the RJ71EIP91.
• Selected: Enabled
• Not selected: Disabled
Disable this item when the parameters of the EtherNet/IP device
need to be deleted from the RJ71EIP91 with the settings in
EtherNet/IP Configuration Tool held.
Clearing of this check box is reflected against 'Reserved station
(Class1)' (Un\G27168 to Un\G27183) on the RJ71EIP91.
Comment Displays the comment input field.
Information about the EtherNet/IP device is described with the
default setting.
IP Address Specifies the IP address of the EtherNet/IP device.
Description Displays the description of the selected item.
Setting range
*1
Up to 50 characters
(Default: Refer to the left.)
000 to 255
(Default: Minimum value of the
control numbers of EtherNet/IP
devices that have not been
set)
• Selected
• Not selected
(Default: Not selected)
• Selected
• Not selected
(Default: Selected)
Up to 255 single-byte
characters
(Default: Varies depending on
the EtherNet/IP device)
*2
1.0.0.1 to 223.255.255.254
(Default: Current IP address of
the EtherNet/IP device)
