Configuring Settings Online; Configuring Settings Offline - Mitsubishi Electric MELSEC iQ-R Series User Manual

Configuring settings online

When setting EtherNet/IP devices online, the following conditions must be met.
• The RJ71EIP91 and EtherNet/IP device are connected to the network.
• A name has been set to the EtherNet/IP device, and the name does not duplicate the name of other EtherNet/IP devices.
• An IP address has been set to the EtherNet/IP device, and the IP address does not duplicate the IP addresses of other
EtherNet/IP devices.
Setting procedure
1.
Add the EtherNet/IP devices to be used to "Device Library". ( Page 94 Adding the EDS file)
2.
Detect the EtherNet/IP devices on the network. ( Page 60 Network Detection)
Select the [Network Detection] tab.
3.
Add the detected EtherNet/IP devices to the network configuration settings.
[When EtherNet/IP devices are added one by one]
Select the EtherNet/IP device in "Network Detection".
[When EtherNet/IP devices are added as a batch]
Select the [Network Detection] tab.

Configuring settings offline

When settings are configured offline, the EtherNet/IP communication settings can be configured without the RJ71EIP91 and
EtherNet/IP devices.
However, check the names of the EtherNet/IP devices used and the network configuration in advance.
Setting procedure
1.
Add the EtherNet/IP devices to be used to "Device Library". ( Page 94 Adding the EDS file)
2.
Add the EtherNet/IP devices to the network configuration settings.
Select the EtherNet/IP device in "Device Library".
3 EtherNet/IP Configuration Tool
96
3.2 Procedure for Registering EtherNet/IP Devices
[Network] [Read Network Configuration]
[Network]
[Network] [Insert and Replace All]
[Library]
[Insert in Configuration]
[Insert in Configuration]