Mitsubishi Electric MELSEC iQ-R Series User Manual page 67

■[Ping] tab
Check for the existence of the EtherNet/IP device with the specified IP address over EtherNet/IP.
Item
Address IP Address
Ping [Ping] button
Loop
Stop on Error
[Clear] button
Ping Result
Description
Specifies the IP address of the EtherNet/IP device to ping.
Pings the specified EtherNet/IP device.
Select this check box to repeatedly ping the device once every
100ms.
Sets whether to interrupt pinging if an error occurs when the
"Loop" check box is selected.
• Selected: Pinging will be interrupted if an error occurs.
• Not selected: Pinging will continue even if an error occurs.
Deletes the content of "Ping Result".
Displays the result of pinging.
Setting range
0.0.0.0 to 255.255.255.255
(Default: Current IP address of
the EtherNet/IP device)

• Selected
• Not selected
(Default: Not selected)
• Selected
• Not selected
(Default: Not selected)


3 EtherNet/IP Configuration Tool
3.1 Window Structure
3
65