4.
Set the RJ71EIP91 as follows.
[Navigation window]
5.
Set the items in "Basic Setting" as follows.
[Navigation window]
6.
Write the set parameters to the CPU module. Then reset the CPU module or turn the system off and on.
[Online]
[Write to PLC]
In the program example, default values are used for parameters that are not shown above. For the
parameters, refer to the following.
Page 43 PARAMETER SETTINGS
[Parameter]
[Module Information]
[Parameter]
[Module Information]
Right-click
[Add New Module]
[RJ71EIP91]
[Basic Setting]
4.1 Program Example of UCMM Message Communications
4 PROGRAMMING
101
4