Mitsubishi Electric MELSEC iQ-R Series User Manual page 137

Section 8 TROUBLESHOOTING
Error code Error
(HEX) level
180Ah Low
180Bh Low
180Ch Low
180Dh Low
Low
180Eh
180Fh Low
1841h Low
0000h -
* Also check that it is set in decimal.
Table 8.1-2 List of error codes (2/2)
Descriptions
Alarm 1 delay time (Un\G15) is
set out of range.
Alarm 2 delay time (Un\G25) is
set out of range.
Integrated value setting value
(Un\G52, 53) is set out of range.
Primary voltage of VT is set out
of range.
Secondary voltage of VT is set
out of range.
Primary current of CT is set out
of range.
Period of measured
acquisition clock is set out of
range.
Normal
Action
Set alarm 1 delay time within the
range* of 0 to 300 (seconds).
Set alarm 2 delay time within the
range* of 0 to 300 (seconds).
Set electric energy preset value
within the range*
999999999 in the double word
format (32-bit integer).
Set primary voltage of VT within
the range* of 0 to 6600 (V).
However, this setting cannot set 0
(Any voltage)
voltage (Un\G1) is 0.
Set secondary voltage of VT within
the range* of 0 to 220 (V).
However, this setting cannot set
0(Any voltage)
voltage (Un\G1) is 0.
Set primary current of CT within
the range* of 0 to 6000 (A).
However, this setting cannot set 0
(Any current (EMU-CT5-A)) or
1000 (Any current (EMU2-CT5))
when primary current (Un\G2) is 0.
data
Set period of measured data
acquisition clock within the range*
of 10 to 10000 (ms).
-
136
RE81WH
Reference
5.2.9
5.2.9
of 0 to
5.2.10
5.2.2
when primary
5.2.2
when primary
5.2.3
5.2.12
-