Mitsubishi Electric MELSEC iQ-R Series User Manual page 69

Section 5 BUFFER MEMORY
5.2.11 Max./min. values clear target (Un\G56)
Set to clear the data by max./min. clear request.
(1) Setting procedure
(a) Set the max./min. values clear target(Un\G56) in the buffer memory. Setting range is as follows.
Setting value
11
12
13
14
19
Others
(b) Turn Max./min. values clear request (YnD) from OFF to ON to enable the setting.
(c) After checking that Max./min. values clear completion flag (XnD) turns ON and clear is completed, set
the Max./min. values clear request (YnD) to OFF.
When detecting that the Max./min. values clear request (YnD) turns OFF, the Max./min. values clear
completion flag (XnD) turns OFF.
Max./min. values clear request (YnD)
Max./min. values clear completion flag (XnD)
積算値セット完了フラグ(X3)
(2) Default value
It is set to "0: Do not clear".
Description
Current demand
Voltage
Electric power demand
Power factor
All of the above
Do not clear
積算値セット要求(Y3)
OFF
OFF
Figure 5.2.11 Max./min. values clear procedure
ON
OFF
ON
OFF
68
RE81WH