GE DR60 Technical Manual page 77

77
There are two parameters to be configured by the user:
Enable Auto COMTRADE Download: When enabled, the unit will be part of the Auto
Polling process, where records not yet saved are automatically downloaded.
Enable Auto Refreshing: When enabled, the unit will be part of the process of Auto
Refresh, where the equipment state will be updated automatically during the process.
The user can change the equipment host address, and enable or disable the "Enable
Auto COMTRADE Download" and "Enable Auto Refreshing". At the end of the editing,
the software automatically communicates with the equipment in order to upgrade the
name and location information.
If the equipment is associated with any transmission, a message will be shown to the
user at the beginning of the Edit.
Note: Further and detailed information on the DR Manager configuration and use can be
found in its technical manual DR_Manager_TM. Download on GE Grid website.
DR60
DR60-TM-EN-2A