GE DR60 Technical Manual page 59

DR60
59
Card not detected, invalid
or incompatible
Internal voltage
Internal temperature
No communication
Ethernet interface 1
Waveform/Fault recorder
memory usage above 98%
Disturbance recorder
memory usage above 98%
Trend recorder memory
usage above 98%
SOE recorder memory
usage above 98%
GOOSE subscriber failure
or timeout
Warnings
Sync OK
No communication
Ethernet interface 2
Waveform/Fault recorder
memory usage above 90%
BSE/ALARMSGGIO1.ST.Alm2
BSE/ALARMSGGIO1.ST.Alm3
BSE/ALARMSGGIO1.ST.Alm4
BSE/ALARMSGGIO1.ST.Alm5
BSE/ALARMSGGIO1.ST.Alm6
BSE/ALARMSGGIO1.ST.Alm7
BSE/ALARMSGGIO1.ST.Alm8
BSE/ALARMSGGIO1.ST.Alm9
BSE/ALARMSGGIO1.ST.Alm10
Data Name
BSE/ALARMSGGIO1.ST.Wrn1
BSE/ALARMSGGIO1.ST.Wrn5
BSE/ALARMSGGIO1.ST.Wrn6
Happens when there are
discrepancies between the
installed boards and the
device CORTEC
Internal voltage
automonitoring alarm
Internal temperature is
abnormal (Out of -10°C to
60ºC)
Loss of communication
with ethernet interface 1
Happens when the
memory becomes 98% full
for waveform recorder
Happens when the
memory becomes 98% full
for disturbance recorder
Records memory exceeds
98% for trend recorder
Records memory exceeds
98% for SOE recorder
Time for the next expected
GOOSE message to come
exceeded
Description
Equipment not sync
Loss of communication
with ethernet interface 2
Happens when the
memory becomes 90% full
for waveform recorder
DR60-TM-EN-2A