Figure 9-2: S1 Security switch
Legend – S1 Security switch
1
Battery
2
Security switch
Ensure the security switch is set to OFF.
On the Station Setup tab, verify that the Security Switch Status field shows Off.
Figure 9-3: Station Setup tab – Security switch status
Type a four-digit security code for Security Code Level 1 (read only access).
Type a four-digit security code for Security Code Level 2 (read and write access).
IMPORTANT NOTE: Record the security codes. Once saved, they are not visible on the Station
Setup tab.
Click Send.
On the board, set the XFC
8 0 | XSE RI ES G5 | 2 10 6 02 6MNAA
G5
or XRC
G5
security switch to ON.