Important Notice - ABB UMC100.3 Manual

2 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—

Important notice

Target group
This description is intended for the use of trained specialists in electrical installation and control and automation
engineering, who are familiar with the applicable national standards.
Safety requirements
The responsible staff must ensure that the application or use of the products described satisfy all the requirements for
safety, including all the relevant laws, regulations, guidelines and standards.
Using this handbook
Symbols
This technical document contains sentinels to point the reader to important information, potential risks and precaution
information. The following symbols are used:
Symbol to indicate a potentially dangerous situation that can cause damage to the UMC or connected
devices or to the environment.
Symbol to indicate important information and conditions.
Symbol that indicates a potentially dangerous situation that can cause personal injury
—
Terms and abbreviations
FDI
FIM
FIM UMC Edition
FIM Device Window Edition
GSD
DCS
PLC
—
Related documents
Name
UMC100.3 Universal Motor
Controller
UMC100.3 Universal Motor
Controller ATEX
Field Device Integration Technology. This is a system-wide solution.
Host systems, like asset management systems, configurators, and device managers must support the FDI client-
server architecture. Field device suppliers must encapsulate device specific software and documentation into an
FDI Device Package.
See https://www.fieldcommgroup.org/ for more information
Field Information Manager. ABB software for the configuration of field devices mainly in process industry. FIM s
based on the FDI standard
Dedicated FIM version for the configuration of UMC100.3 There are also other versions of FIM available, that also
enable the UMC100.3 configuration. Following we refer always to this version. Sometimes this version is only called
FIM
Limited trial version version of the software, free of charge. It also includes the Custom Application Editor, but no
offline mode for saving the settings on the PC
Geräte Stammdatei (German) which means a electronic data sheet of a device
Distributed Control System
Programmable Logic Controller
Type
Manual English version
Manual English version
Document No.
2CDC135032D0204
2CDC135033D0202