How To Proceed - ABB UMC100.3 Manual

C U S T O M A P P L I C AT I O N E D I T O R M A N U A L 9
—
Introduction
4
2
A
3
The window of the configuration tool with active Custom Application Editor consists of:
A Worksheet, B Function Block Library, C Message Window, D Custom Editor Toolbar,
E selector for the function block library version.
An application program consists of the following graphical elements:
• Connections (lines)
• Parameter values
• Function blocks
• Comments
• Connectors
The signal flow of an application is from left to right. The signal flow lines are edited with the left mouse button. Elements
can be dragged from the library window B and dropped in the worksheet A .
During commissioning (when an online connection to the UMC exists) the present application status can be displayed.
—

How to proceed

It is highly recommended that you read chapter "Application Elements" to gain a basic understanding of the elements an
application consists of. Then the section "First Application" should be consulted when starting up.