C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Function block reference
—
Overview
In this chapter all function blocks with their inputs, outputs and parameters are described. It is organised into the following
subsections:
• UMC Input: Function blocks in this group represent inputs of the UMC (e.g. Digital Inputs, Command data from the bus).
• UMC Output: Function blocks in this group represent outputs of the UMC (e.g. Monitoring data)
• IO Modules: Function blocks in this group represent the inputs and outputs of the expansion modules. These function
blocks can only be used if the related IO module is connected and enabled in the basic configuration. Otherwise the UMC
will create an error "Module missing".
• Logic Functions: This group contains standard function blocks that represent simple boolean operations such as logic
AND, OR, Inverter, Timers, Counters etc.
• Basic Functions: In this group basic UMC functions are represented as function blocks. The function blocks provide access
to the basic UMC functions such as Fault Reset, Current Measurement, PTC Measurement ...
• Control Functions: In this group function blocks for the different motor starter functions are available.
25