GE AKTAavant Getting Started page 93

Step
6
7
Cassette identification
After the Frac drawer has been closed, the Frac arm scans the Cassette type code of
each cassette to identify the cassette types. If deep well plates are used, the instrument
also identifies the types of deep well plates.
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB
Action
Place the Cassette tray on the Tray support of the Frac drawer. Make sure
that the front of the tray (marked with the GE logo) faces the front of the
drawer and is hooked onto the two pins.
Close the Frac drawer. Make sure that it snaps into closed position.
WARNING
Moving parts in Fraction collector. Do not open the Fraction
collector drawer when the Fraction collector is active. If you need
to access the Fraction collector, press Pause, and make sure that
the movement has stopped before opening the drawer.
7 Prepare the system for a run
7.6 Prepare the Fraction collector
93