Step
4
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB
Action
If desired, the flow rate and volume of the pump wash
TIP:
can be edited before the pump wash is started. In the
Manual instructions dialog, select Pumps and
pressures:Wash settings and edit the settings for System
flow rate and System pump wash volume. Click Execute.
In the Manual instructions dialog:
Select Pumps and pressures:Pump wash, and select the inlet to be
•
primed from the Inlet A or Inlet B drop-down list.
If several inlets are to be used, click Insert to insert a selected inlet in
•
the Instruction execution list. Insert all inlets to be used in the Instruction
execution list.
•
Click
.
Result: A pump wash of the first inlet in the Instruction execution list starts.
7 Prepare the system for a run
7.3 Prime buffer inlets and purge System pumps
79