ABB 2600T Series Operating Instruction page 48

MV Setup - open Tank
Fig. 33: Diagram - "Level measurement - open tank"
H1 The lower fill level to be measured | H2 The higher fill level to be measured
1 Fill level | 2 Pressure transmitter | 3 Shutoff valve | 4 Impulse line
48 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
MV-Calculation
Level Calculation
Level Unit
Lower Level
Upper Level
Transm. mount. Pos.
Temperature Unit
Min. Temperature
Max. Temperature
Density Unit
Min. Temp. Density
Max. Temp. Density
Tank Temperature
Measurement
Restore Last Parameter
No Calculation
Flow
Level
Steam Drum Level
Open Tank
Closed Tank
Closed Tank, 2 Remote
Seals
Dimension b from Fig. 33
Dimension d from Fig. 33
Dimension a from Fig. 33
Minimum measuring medium temperature
Maximum measuring medium temperature
Density of the measuring medium at minimum temperature
Density of the measuring medium at maximum temperature
PT100
Sensor Temperature