ABB 2600T Series Operating Instruction page 42

Parameter name
12.3456 [unit]
Next
3. Use to select the next decimal place to change.
4. Use or to set the desired value.
5. Use to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use to confirm the setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by
entering the individual characters.
Menu name
Parameter name
Currently set value
Next
1. Select the parameters you want to set in the menu.
2. Use to call up the parameter for editing. The currently
selected character will be shown highlighted.
Parameter name
ABC.........
ABCDEFGHIJKLMOPQ
Next
3. Use to select the character to be changed.
4. Use or select the desired character
5. Use to select the next character.
6. If necessary select and set additional characters in
accordance with steps 3 to 4.
7. Confirm the setting with
This concludes the procedure for changing a parameter value.
42 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
OK
Edit
OK
.