Configuration Of The Pressure Transmitter Menu; Controlled Without Integrated Lcd Display; Menu Navigation; Menu Levels - ABB 2600T Series Operating Instruction

11.5 Configuration of the pressure transmitter menu-

controlled without integrated LCD display

The LCD display is only used for visualization of the measured
values and for configuration of the display and of the
transmitter.
In addition, diagnostics messages are displayed.

11.5.1 Menu navigation

1
2
5
Exit
Fig. 31: LCD display
1 Operating buttons for menu navigation |
2 Menu name display | 3 Menu number display |
4 Mark to indicate the relative position within the menu |
5 Display of the current function of the operating buttons
You can use the or
through the menu or select a number or character within a
parameter value.
Different functions can be assigned to the
operating buttons. The function that is currently assigned (5) is
shown on the LCD display.
Operating button functions
Meaning
Exit Exit menu
Back Go back one submenu
Cancel Cancel parameter entry
Next Select the next position for entering numerical
and alphanumeric values
Meaning
Select Select submenu / parameter
Edit Edit parameter
Save parameter entered
OK
38 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
M10145
Menu
3
4
5
Select
operating buttons to browse
and

11.5.2 Menu levels

There are two levels under the process display.
Information level
Diagnostic
Operator Page
Signals View
and
Process display
Information level
Configuration level
Process display
Configuration level
Easy Setup
MV Setup - Mass Flow
MV Setup - open Tank
MV Setup - closed
Tank
MV Setup - Steam
Drum Level
MV Setup - 2 Remote
Seals
Device Setup
MV Overview
Display
Process Alarm
Calibration
Totalizer
Diagnostic
Device Identify
Communication
The process display shows the current process
values.
The information level contains the parameters
and information that are relevant for the
operator. The device configuration cannot be
changed on this level.
The configuration level contains all the
parameters required for device commissioning
and configuration. The device configuration can
be changed on this level.