Apexpro Receiver Installation; Mounting Options - GE ApexPro TT Technical Manual

With active antennas

ApexPro receiver installation

Mounting options

2001989-351A
DC
Bias
Amplifier
Tee
RF
+12 VDC 1A
Power Supply
Due to the fact that frequency drift occurs even without power applied, the cailbration
schedule should take into account the date the equipment was last calibrated,
including equipment in storage locations and spares.
Before installation, determine and record the date of initial factory calibration of
transmitters and receivers from the removable calibration sticker that ships on these
devices. If the installation is not within 30 months of the date shown on the
manufacturer calibration sticker, calibrate before installation.
4-10.
The mounting options for the ApexPro Telemetry System Receiver System are:
Standard tabletop mount (four rubber feet)
Optional rack mount for standard 19 inch network rack system with a 4U panel
height (177.8mm/7in.). (Order rack mounting kit #2004232-001 separately.)
ApexPro™
Installation and configuration
ApexPro
Receiver
Filter,
System
Notch,
Splitter
or
Bandpass
ATS
RX
Unity MC
CIC Pro
Center(s)
270B
See Calibration on page
3-13