Transmitter Controls, Indicators And Labels - GE ApexPro TT Technical Manual

Transmitter controls, indicators and labels

Views
2001989-351A
The transmitters have the following buttons and LEDs:
ApexPro, ApexPro CH, and T14 Transmitters
ApexPro ApexPro CH & T14
RL RA LA LL Va Vb RL RA LA LL Va Vb
N R L F Ca Cb
Change Battery
Verify Leads
Pause Alarm
ApexPro™
Equipment Overview
Function
When first powered up, the lead LEDs flash
rapidly, followed by two slow flashes. The
transmitter begins functioning after the two
slow flashes.
When any of the transmitter's buttons are
pushed, the lead LEDs flash twice.
When the battery power is running low, the
change battery LED flashes.
When pressed, the lead LEDs flash twice. If a
lead is valid, its LED stays lit for one minute.
When the Pause Alarm condition occurs, the
pause alarm LED flashes until the condition
ends.
605A, 207A, 206B
2-9