Table of Contents
Advertisement
2
RS-232C/RS-485 SET
(when optional interface board is installed)
When RS-485 is selected
Connect the digital video recorder's RS-485 (A, B) control
terminals in series to the system controller, multiplexer,
digital video recorder, or similar device.
RS-485
4
Select "RS-485" and press the [ ]
button.
The cursor moves to "DATA SPEED".
5
Press the [ ] button, then the [
[
] button to set the data speed, and
press the [ ] button.
Possible selections: 2400, 4800, 9600, and 19200
(Example: 19200)
6
Press the [ ] button after moving the
cursor to "STATUS INFO" and press the
[
] or [
] button to set "ON". Then
press the [ ] button.
[Settings] (
indicates default setting.)
Setting
ON
Status information is transmitted.
OFF
Status information is not transmitted.
RS-485
] or
Description
7
Press the [ ] button after moving the
cursor to "ALARM INFO" and press the
[
] or [
] button to set "ON". Then
press the [ ] button.
[Settings] (
indicates default setting.)
Setting
ON
Alarm information is transmitted.
OFF
Alarm information is not transmitted.
8
Press the [ ] button after moving the
cursor to "ADDRESS" and press the
[
] or [
] button to change the
setting.
[Setting conditions]
Addresses between "0" and "127" can be set for this
unit.
9
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Addresses must not be duplicated when a number of
different digital video recorders are being connected.
Also, turn on the termination switch for the last digital
video recorder in the connection sequence.
70
Description
English
Advertisement
Table of Contents
