Table of Contents
Advertisement
8
ALARM REC MODE SET
Setting pre-alarm recording
1
Move the cursor to "PRE-ALARM
RECORDING" and press the [ ] button,
then press the [
change the setting.
[Settings] (
indicates default setting.)
Setting
OFF
Pre-alarm recording is not carried out
ON
Pre-alarm recording is carried out
2
Move the cursor to "REC RATE" and
"DURATION" and press the [ ] button,
then press the [
change the setting.
The maximum number of images (shown in parentheses)
changes in accordance with the new settings.
Maximum number
of images
[Setting conditions]
When performing pre-alarm recording with a "FIELD"
recording rate, short settings (i.e., 60.00 or 30.00 FPS)
cannot be made for "REC RATE". ( P. 48)
When normal recording and pre-alarm recording are
performed simultaneously, audio will not be recorded
together with the pre-alarm recording image.
When pre-alarm recording and normal recording are
performed simultaneously with a multiplexer connected,
the recording rate for pre-alarm recording should be set
to a shorter rate than that for normal recording.
Although the image from a single camera may be
recorded continuously when a short recording rate is
set, a long rate can result in no images being recorded
during normal recording.
] or [
] button to
Description
] or [
] button to
When settings have been completed
Press the [EXIT/OSD] button.
The display returns to the normal screen.
"PRE" appears in the operation display area. When an
alarm occurs, "ALARM" is displayed.
Number of alarm
recordings
PRE display
Setting the alarm trigger
This setting indicates how intruders are to be detected.
1
Move the cursor to "ALARM TRIGGER"
and press the [ ] button, then press the
[
] or [
] button to change the
setting.
[Settings] (
indicates default setting.)
Setting
Performs alarm recording when an external
alarm is generated (when a switch is attached to
ALARM
the alarm input terminal on the rear panel, and
the switch is activated).
Performs alarm recording when a motion sensor
SENSOR
detects movement. See the information on
setting motion sensors. ( P. 67)
ALARM
Performs alarm recording when both the
AND
external alarm and a motion sensor are
activated simultaneously.
SENSOR
ALARM OR
Performs alarm recording when either the
external alarm or a motion sensor is activated.
SENSOR
[Setting conditions]
When sensor selection has been made (i.e.,
"SENSOR", "ALARM AND SENSOR", or "ALARM OR
SENSOR") it will be necessary to set the motion
sensors.
P. 67)
(
66
10-20-04 PRE
0023
08: 30: 00 EN
10FPS
Description
English
Advertisement
Table of Contents
