Normal Rec Mode Set - Sanyo DSR - 300 Instruction Manual

2 MENU-SPECIFIC SETTINGS
(when optional interface board is installed)

6. NORMAL REC MODE SET

Set conditions for normal recording and timer recording as
described below.
1
2
3
4
5
Setting the picture quality for recording
Set the picture quality for recording to the normal recording
area as follows.
1
Select "PICTURE QUALITY".
[Settings] ( indicates default setting.)
Setting
SUPER FINE Super Fine
FINE Fine
ENHANCED Enhanced
NORMAL Normal
BASIC Basic
2
Select "FRAME" or "FIELD" recording.
[Settings] ( indicates default setting.)
Setting
Sets the recording method to field. This is the
FIELD
normal recording method.
Sets the recording method to frame. This
method is used when the resolution of
still-type images must be improved. Note,
FRAME
however, that this method is not suitable for
fast-moving images as they can become
blurred.
English
Description
Description
103
Setting audio recording
Audio can be recorded together with images when
performing normal recording.
Note, however, that since this audio data will also be
stored in the normal recording area, the recording time for
this area will be reduced.
3
Select "AUDIO RECORDING".
[Settings] ( indicates default setting.)
Setting
ON Audio will be recorded.
OFF Audio will not be recorded.
Audio recording can only be specified when the
recording rate is more than A 5.00/10.00 FPS.
Setting the recording rate
Set the recording rate for normal recording as follows.
(Default setting: A 5.00/10.00 FPS)
4
Select the recording rate for normal
recording.
A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,
A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,
1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,
1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,
0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,
0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)
Selecting setting values
Image resolution is determined by the product of picture
quality and recording rate. The higher the picture quality
and the faster the recording rate, the better the image
resolution; however, as higher resolution requires more
storage capacity, the recording time will be reduced
accordingly.
The recording rate will be limited between A 10.00/
20.00 and 0.50/1.00 FPS when the setting for pre-alarm
recording is "ON".
The recording rate for timer recording should be set
separately using the TIMER SET menu. ( P. 104)
5
Click [SAVE].
The new setting is saved.
Description