Table of Contents
Advertisement
2
RS-232C/RS-485 SET
(when optional interface board is installed)
<MAIN MENU 2>
Settings for RS-232C and RS-485
This section describes the settings to be made for
communicating using an RS-232C or RS-485 cable. (A
separately-sold option board will be required in such a
case.)
1
Press the [MENU] button twice.
The <MAIN MENU 2> screen appears.
2
Press the [
"2. RS-232C/RS-485 SET", and press the
[ ] button.
The <RS-232C/RS-485 SET> screen appears.
3
Press the [ ] button.
"RS-232C" flashes. Press the [
either "RS-232C" or "RS-485".
English
[MENU] button
] or [
] button to select
] or [
] button to select
[
] button
[
] button
[
] button
[EXIT/OSD] button
When RS-232C is selected
Connect a special RS-232C cable (sold separately)
between this unit's RS-232C port and the PC.
RS-232C terminal
4
Select "RS-232C" and press the [ ]
button.
The cursor moves to "DATA SPEED".
5
Press the [ ] button, then the [
[
] button to select the "DATA
SPEED".
Possible selections: 2400, 4800, 9600, and 19200
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
69
[
] button
PC
] or
Advertisement
Table of Contents
