Clock Set; Daylight Saving/Ext. Clock Set - Sanyo DSR - 300 Instruction Manual

2
MENU-SPECIFIC SETTINGS
(when optional interface board is installed)

1. CLOCK SET

Set the unit's time and date as described below.
1
Select the "Month/Day/Year Hour/
Minutes" field.
The day of the week will be set automatically based on the
date.
1
2
2
Click [SET].
The current time is set.
English
2. DAYLIGHT SAVING/EXT. CLOCK
SET
1
2
3
4
5
DAYLIGHT SAVING setting
1
Change the setting for daylight savings
time.
[Settings] ( indicates default setting.)
Setting
Time is automatically adjusted to daylight
USE
savings time.
Time is not automatically adjusted to daylight
NO USE
savings time.
2
Set the date/time at which to switch
from standard time to daylight savings
time.
3
Set the date/time at which to switch
from daylight savings time to standard
time.
EXT. CLOCK SET setting
Synchronized operation will not be possible when time
differences exist between the unit and the connected
peripheral devices. By setting the external time as
described here, all devices connected to the clock adjust
terminal can be set to the same time.
4
Select "ADJUST TIME".
Each day at the specified time, a signal will be output to
adjust the time of connected devices.
5
Click [SAVE].
The daylight savings time or adjustment time is set.
99
Description