ABB C1300 User Manual page 28

C1300
Advanced circular chart recorder
Pen X Function
set to
Trend
(Section 3.13)
None
Millivolt
Milliamp
High Ohm
Low Ohm
Volts
Thermocouple
Rtd
26
Channel Tag
Press the key to open the Edit screen.
Use the , and keys to enter the channel tag required – see Fig. 2.1 on page 6.
Note. Any characters not permitted in this tag are skipped when scrolling through the selection.
Press the key to close the edit screen and save the tag.
Channel Input Type
Select the required channel input type:
None
– None
Millivolt
– Millivolt (150mV)
Milliamp
– Current
High Ohm
– High resistance (>750)
Low Ohm
– Low resistance (750)
Volts
– Voltage
Thermocouple – Thermocouple
Rtd
– Resistance thermometer
Return to top of page.
Linearizer Type
Select the required linearizer type.
None
– No linearizer
Type K
– Type K thermocouple
Type R
– Type R thermocouple
Type S
– Type S thermocouple
Type T
– Type T thermocouple
Type J
– Type J thermocouple
Type E
– Type E thermocouple
Type N
– Type N thermocouple
Type B
– Type B thermocouple
Rtd
– Resistance thermometer
Square Root – Square root
3/2
3/2
– X (Open channel flow applications)
5/2
5/2
– X (Open channel flow applications)
Continued on next page.
3 Configuration
IM/C1300 Rev. J