Powering Up The Recorder - ABB C1300 User Manual

C1300
Advanced circular chart recorder

1.2 Powering up the Recorder

To power up the recorder:
1. Switch on the supply to the recorder, any power-operated control circuits and the input signals. Wait for the pens to settle.
2. The start-up self-test sequence shown in Fig. 1.3 is shown on display screen 1 when the power supply is first switched on.
Fig. 1.3 Recorder Start-up Self-test Sequence
4
Instrument Type and Software Version
1 Preparation
Self Tests, Software Key and
Module Identification
IM/C1300 Rev. J