Panel Mounting - ABB C1300 User Manual

C1300
Advanced circular chart recorder

4.2.2 Panel Mounting

Dimensions in inches (mm)
2
Mark four mounting holes
14.00 (355.6)
12.72 (323.08)
minimum
14.19
(360.4)
1.70
(43.2)
0.64 (16.25)
Minimum Cut-out Dimensions
0.20
(5.0)
13.7 (348.0)
maximum
0.15 (3.8)
minimum
Ensure cut-out positioned centrally
between mounting holes
Maximum Cut-out Dimensions
Fig. 4.5 Panel Mounting
IM/C1300 Rev. J
4 holes 0.281 dia.
1
or tap for / in. thread
4
11.25
12.72
(285.8)
(323.1)
minimum
1
Cut hole in panel
(see below)
Note 1
14.6
(371.0)
maximum
0.15 (3.8)
minimum
3
Drill four suitable holes
Secure in panel using
5
four bolts, nuts and washers
Notes.
1. The recorder can be inserted into a panel cut-out of
any size between the minimum and maximum
dimensions illustrated, provided the cut-out is
positioned centrally relative to the fixing holes. If the
panel cut-out is larger than the maximum, a locally
manufactured adaptor plate is required.
2. If panel-mounting to NEMA 4X hosedown standard is
required, a continuous bead of suitable silicon sealant
must be applied between the case flange and the
panel. Do not use the optional gasket.
4 Mechanical Installation
Optional gasket
(see below)
Note 2
Locate instrument
4
in cut-out
63