ABB PST30 Installation And Maintenance Manual page 52

Settings
Functional settings
Figure 26: Warnings group
Settings
Functional settings
7
Figure 27: Faults group
7.14
1SXU 132 021 M0201
Chapter 7
Settings and configuration
7:2.4.3 Warnings
Start / Stop
To set parameters related to the warnings, enter the Warnings group:
Warning high current (Warn I=High)
Protections
Activate the warning function if required by changing to Yes.
Warnings
Press Store to save the selected operation
Faults
Warning high current level (Wa I=H Lev)
Inputs Set the level of the high current warning.
Available only if the function is selected.
Outputs
Press Store to save the selected operation.
Fieldbus
Warning low current (Warn I=Low)
Seq. Start
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
Warning low current level (Wa I=L Lev)
Set the level of the low current warning.
Available only if the function is selected.
Press Store to save the selected operation.
Warning overload (Warn OL)
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
Warning overload level (Wa OL Lev)
Set the level of the overload warning.
Available only if the function is selected.
Press Store to save the selected operation.
Warning SCR overload (Warn SCR OL)
Start / Stop
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
Protections
7:2.4.4 Faults
Warnings
Phase loss type of operation (Ph Loss Op)
Faults
Select what operation should be initiated if a phase loss fault occurs:
Inputs
Stop–M
Stop–A
Outputs
Press Store to save the selected operation.
Fieldbus
Seq. Start Fieldbus fault type of operation (FB Fault Op)
Select what operation should be initiated if a fieldbus communication fault occurs:
Stop–M
Stop–A
Press Store to save the selected operation.
The motor will stop and a manual reset is required.
The motor will stop and an automatic reset is performed.
The motor will stop and a manual reset is required.
The motor will stop and an automatic reset is performed.
Low Voltage Products & Systems
ABB nc. • 888-385-1221 • www.abb-control.com