ABB PST30 Installation And Maintenance Manual page 38

Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 25: Event log menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 26: Status information menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 27: Reset events menu
Low Voltage Products & Systems
ABB nc. • 888-385-1221 • www.abb-control.com
Chapter 6
Human-Machine nterface (HM)
6:2.5 Event Log menu
The Event Log menu is used to check the event log in the softstarter. When entering this menu, the
twenty latest events in the log are presented, in chronological order with the latest event as No. 1,
the second latest as No. 2 etc.
The events are presented with "type of event", date and time.
Use the navigation keys to view all entries in the event log.
6:2.6 Status Information menu
The Status information menu is used to present various information.
Use the navigation keys to cycle through the various sub menus.
If the unit is connected "inside delta", the displayed phase currents, L1, L2 & L3 are inside delta cur-
rent values.
Display text
Frequency
Phase seq
Connection
Phase L1
Phase L2
Phase L3
Run time
No. of Starts
SW Ver. CU
SW Ver. FU
SW Ver KP 1
DB Version
MAC Address
LV Board No
1 Only if connected.
6:2.7 Reset Events menu
The Reset Events menu is entered automatically when a fault has occurred or a protection is acti-
vated. It can also be entered through the main menu.
Use the navigation keys to view all events. Each event can be reset.
Function
Measured frequency
Phase sequence indication
Type of connection, In Line/Inside Delta
Phase current L1
Phase current L2
Phase current L3
Total run time of the motor
Run counter
Software version CU.
Software version FU.
Software version External Keypad
Database version
Internal addressing
Serial No of the LV PCB
6
6.7
1SXU 132 021 M0201