Using The Umc100.3 In A Devicenet Network - ABB UMC100.3 Manual

U M C 1 0 0 . 3 U N I V E R S A L M O T O R C O N T R O L L E R T E C H N I C A L D E S C R I P T I O N
30

Using the UMC100.3 in a DeviceNet Network

DeviceNet is based on the Controller Area Network (CAN) technology and mostly used in the Americas.
To integrate the UMC100 into a DeviceNet network use the DNP31 communication interface.
The figure below shows the sketch of a DeviceNet line with DNP31 and UMC100s.
More details are available in the technical manual of the DNP31.
AC500
with
DeviceNet
Master
—
DeviceNET Line with UMC100.3 and DNP31. Use standard DeviceNet cable for wiring
UMC with
UMC with
DNP31
DNP31