The Lcd Control Panel Umc100-Pan - ABB UMC100.3 Manual

T H E LC D C O N T R O L PA N E L U M C 1 0 0 - PA N
—

8 The LCD Control Panel UMC100-PAN

Overview
The UMC100-PAN provides a easy to use multi-language user interface for the UMC100.3. In this chapter you will find the following
information:
• menu structure
• how to operate the UMC100.3 with the LCD panel
• how to acknowledge faults
• how to watch process data
• how to configure the UMC100.3 using the LCD panel
• how to use the LCD panel as parameter storage (e.g. for backup purposes)
• how to use the LCD panel as automatic parameter backup storage
See the "Installation" chapter if you are looking for information on how to connect and wire the LCD panel.
The UMC100-PAN can be either plugged directly on the UMC or mounted on the switchgear door using the door mounting kit. The
following diagram shows the LCD panel with its buttons, LEDs and LCD area.
This chapter describes how the parameters can be accessed from the UMC100-PAN. Please look into section
"Parameters and Data-Structures on a Fieldbus" for an explanation of the parameters.
Scroll upwards
Scroll downwards
Left hot key: Context
- specific function: e.g.
"Enter Control Menu"
USB Configuration
Interface
Stop motor
LCD with background
lightning
Status LEDs:
Green: Ready
Yellow: Running
Red: Fault
Right hot key: Context
- specific function: e.g
"Enter Configuration Menu"
Start motor
101