Vi150-Fbp.0; Vi155-Fbp.0 - ABB UMC100.3 Manual

S Y S T E M O V E R V I E W

VI150-FBP.0

The VI150-FBP.0 adds voltage and power protection functions to the UMC. It provides three voltage inputs and one relay output. It
can be used in three- and single phase operation mode.
The module can be used with grounded systems only
(e.g. TN-C / TN-S systems according to IEC 60364).
The following figure shows the terminals and monitoring elements of the VI150-FBP.0 module.
Connecting terminals for
the line voltage inputs.
Connecting terminals
for communication with the
UMC100 and further IO modules.
LEDs
green READY = operation
yellow DIAG = warning
red ERROR = module fault
Connecting terminals
for the relay output
Terminals
for the
24 V DC supply

VI155-FBP.0

The VI155-FBP.0 adds voltage and power protection functions to the UMC. It provides three voltage inputs and one relay output. It
can be used in three- and single phase operation mode.
The module can be used with grounded and ungrounded systems
(e.g. TN or IT-systems according to IEC 60364).
The following figure shows the terminals and monitoring elements of the VI155-FBP-FBP.0 module.
Connecting terminals for
the line voltage inputs.
Connecting terminals
for communication with the
UMC100 and further IO modules.
LEDs
green READY = operation
yellow DIAG = warning
red ERROR = module fault
Connecting terminals
for the relay output
Terminals for the
24 V DC supply
L1 NC L3
NC L2 NC

1 C a 1 C b 2 C a 2 C b
RDY
Diag
ERR
DOC DO0 NC
0V 24V DC NC
L1 NC L3
NC L2 NC

1 C a 1 C b 2 C a 2 C b
RDY
Diag
ERR
DOC DO0 NC
0V 24V DC NC
Front label
Front label
13