Materials; Applicable Standards - ABB ACS800-U7 Hardware Manual

Materials

Cabinet
Busbars
Fire safety of materials
(IEC 60332-1)
Package
Disposal

Applicable standards

• IEC/EN 61800-5-1:2007
• EN 60204-1:2006 +
A1:2009
• EN 60529:1991
• IEC 60664-1:2007
• EN 61800-3:2004
• UL 508C (2002)
• UL 508A (2001)
• NEMA 250 (2003)
• CSA C22.2 No. 14-10:2010 Industrial control equipment
Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately 20
micrometres). Polyester thermosetting powder coating (thickness approximately 80
micrometres) on visible surfaces. Colour RAL 7035 light beige semigloss.
Tin-plated copper
Insulating materials and non-metallic items mostly self-extinctive
Wood. Plastic covering of the package: PE-LD, bands PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
The drive complies with the standards below. The compliance with the European Low
Voltage Directive is verified according to standards EN 61800-5-1 and EN 60204-1.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
emergency-stop device.
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
UL Standard for Safety, Power Conversion Equipment, second edition
UL Standard for Industrial Control Panels, first edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
131
Technical data