Energizing And Starting The Drive; Checks Before Starting The Drive; Starting The Drive From Remote; Starting The Drive Locally - ABB ACS580MV Quick Manual

32 Operation

Energizing and starting the drive

It is recommended to have the following documents at hand when starting the drive locally
for the first time after commissioning:
• ACS580MV Wiring Diagram
• User's Manual "ACS-AP-X assistant control panels user's

Checks before starting the drive


DANGER
Hazardous voltages!
All covers must be screwed in place to prevent unintentional contact with energized
components.
The manual release of the door safety switches must be in the locked position. The
locked position prevents doors of medium voltage compartments being opened
unintentionally during operation.
When the drive is put into service after it has been commissioned, or after it has been
taken out of service for maintenance or troubleshooting, check the drive according to the
following list:
•
Check that no tools and foreign objects are left inside the cabinets.
•
Check that all auxiliary power supplies from external sources are switched on.
•
Check that all internal circuit breakers of the drive are closed.
•
Check that all grounding devices are removed
•
Check that all covers are mounted and the doors are closed, locked and / or bolted.
•
Check that the MCB is in operating position.
•
Check that there is no run interlock active.

Starting the drive from remote


When the drive is operated from remote through a higher-level control system or an
operator control desk, follow the instructions in the appropriate manuals.

Starting the drive locally


5. Press the SUPPLY ON pushbutton to connect the drive to the main power supply. The
following takes place:
•
The MCB closes.
•
The DC link charges.
While the DC link charges, the SUPPLY ON pushbutton flashes. As soon as the DC
link is charged, the SUPPLY ON pushbutton changes to a permanent light.
to identify the circuit breakers
manual"