Setting Security And Service Parameters; Setting Network Fault Tolerance Parameters; Setting Conference Parameters; Configuring The Network Address Book - Huawei TP3106 User Manual

HUAWEI TP3106&TP3118&TP3118S
User Guide
To view the SIP and network gatekeeper (GK) registration information about any of the three codecs, on the
Device Control, click the corresponding codec, and check the details displayed on the right pane.

2.3.5 Setting Security and Service Parameters

Set security and service parameters that are applicable to H.323 video conferencing systems,
and the administrator's phone number.
From the home page of the Telepresence System Manager, choose System Settings > Security
and Service, set security and service parameters, and click Save.

2.3.6 Setting Network Fault Tolerance Parameters

Appropriate settings of network fault tolerance parameters solve lip synchronization problems
during conferences.
From the home page of the Telepresence System Manager, choose System Settings > Network
Fault Tolerance, set network fault tolerance parameters, and click Save.

2.3.7 Setting Conference Parameters

From the Telepresence System Manager, you can set general parameters (such as audio protocol,
video protocol, video format, video bandwidth) for initiating conferences.
From the home page of the Telepresence System Manager, choose System Settings >
Conference, set general conference parameters, and click Save.

2.3.8 Configuring the Network Address Book

To download site records stored in the network address book, set the parameters used for
communication between the telepresence host and the network address book server.
From the home page of the Telepresence System Manager, choose System Settings > Network
Address Book. Set the network address book , Lightweight Directory Access Protocol (LDAP)
server and eSpace server parameters and click Save.

2.3.9 Setting Other Peripherals Parameters

The telepresence host allows you to control a computer after you set the server Media Access
Control (MAC) address on the Telepresence System Manager.
From the home page of the Telepresence System Manager, choose System Settings > Other
Peripherals, set other peripherals parameters, and click Save.

2.4 Using the Online Help

To view the online help, use either of the following methods:
l
l
Issue 01 (2015-02-07)
NOTE
Click in the upper right corner of the window to display the home page. From the home
page, you can navigate to the desired section.
Click on a specific page to view the parameter description, detailed configuration, and
operation method.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Using the Telepresence System Manager
15