Huawei TP3106 User Manual page 32

HUAWEI TP3106&TP3118&TP3118S
User Guide
Table 3-4 Conference parameters
Parameter
Default call type
Default
presentation mode
Answer mode
Conference
security
Voice activation
sensitivity
Interval for
viewing sites in
turn
Default access code Specifies the default conference access number. This parameter is
Issue 01 (2015-02-07)
Description
Specifies the default protocol used when calling a site.
l H323: The H.323 protocol is used for audio-visual conferences.
l 4E1: 4E1 is used for audio-visual conferences.
NOTE
This option is available only when the telepresence host has a 4E1 interface
card installed and 4E1 parameters have been set on the Telepresence
System Manager.
l SIP: The Session Initiation Protocol (SIP) is used for audio-visual
conferences.
l AUTO: The system randomly selects a protocol.
Specifies whether the presentation sharing function is supported.
l Disable: not supported
l Presentation: supported
Specifies the local site's answer mode when there is an incoming call.
l Auto: Calls are answered automatically.
l Manual: Calls must be answered manually.
Specifies whether media stream encryption is enabled for the
conference.
l Insecure conference: not encrypted
l Secure media conference: encrypted
Specifies the sensitivity for the voice activation function used in
multipoint conferences.
l High: Voice activation is performed even when the voice volume
is low.
l Medium: Voice activation is performed when the voice volume is
medium to high.
l Low: Voice activation is performed when the voice volume is high.
Specifies the interval for switching between sites when the viewing
sites in turn function is enabled. The value ranges from 5s to 3600s.
available only when the system supports PassCode.
For details about how to enable PassCode, contact the system
administrator.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Using the Touch Panel
23