Installation Requirements - Huawei DBS3900 Installation Manual

LampSite
Installation Guide
Table 6-2 Wall-mounted suggestion
Installation
Mode
Installing the
pRRU3901 on
a wall by
drilling holes
For details, see
pRRU
Installed on a
Wall.
Installing the
pRRU3901 on
a wall using a
V clamp
through an
attachment
plate
For details, see
pRRU
Installed on a
Plate.
Installing the
pRRU3901 on
a wall using a
plate on a
metal wall
Issue 08 (2015-01-15)
Requirements
l The wall can bear
a load at least four
times the weight
of a pRRU3901.
l The screws must
be tightened with
a torque of 10
N·m. This ensures
the screws work
properly and the
wall remains
intact without
cracks in it.
l The wall can bear
a load at least four
times the weight
of a pRRU3901.
l The thickness of
the wall is less
than the bolt
length (80 mm).
l The wall cannot
bear a load at least
four times the
weight of the
pRRU3901. For
example, EPS
walls, MDF
walls, or walls
cannot be drilled.
l The wall is too
thick to drill, and
the pRRU3901
cannot be
installed on a wall
using a V clamp
through an
attachment plate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mounting Brackets
1. Plate
2. Screw (M6X50)
3. Plastic expansion
sleeve
4. Flat washer
1. Plate
2. V clamp
3. Bolt (M6X80)
The plate is prepared by
customers.
6 Installing a pRRU3901
Installation
Diagram
51