LampSite
Installation Guide
----End
5.3.2 Installing an RHUB3908 in a 19-Inch Shelf
If a shelf houses more than one RHUB3908, 1 U space is required between two RHUB3908s.
The PSU must be installed at the bottom of the cabinet.
Procedure
l
Issue 08 (2015-01-15)
Figure 5-16 Pushing an RHUB3908 into a cabinet
4.
Use a torque screwdriver or Phillips screwdriver to tighten the four M6×16 screws
with a torque of 2 N•m, as shown in
Figure 5-17 Tightening screws
The following describes how to install an RHUB3908 with mounting ears installed in
reverse mode:
NOTE
If necessary, request one more person for assistance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing an RHUB3908
Figure
5-17.
24