Canon BU 45 User Manual page 31

2.
If a keyboard is not connected to the RCP, select the
superimpose a keyboard over the Camera Configuration screen (Figure 19):
Keyboard
Figure 19 Keyboard
3.
Configure each camera that is connected to the RCP, entering (using the
keyboard) or selecting (using the drop-down arrows) the information for each
camera on the first available line of the Camera Configuration screen.
Select the IP Address box, then type the IP address (e.g., 10.0.1.211) of
a.
the device server to which the camera is connected.
Select the Port box, then type the number (e.g., 3001) of the serial port on
b.
the device server to which the camera is connected.
Select the drop-down arrow of the Cam Type box, then select the type of
c.
camera (e.g., BU45H) that is connected.
If desired, select the Description box, then type a short name (up to 18
d.
characters or spaces) or description (e.g., Roof Camera) for the camera
to replace the default description (e.g., Camera 1).
If needed, select the title bar on the keyboard and drag the
keyboard to a different location on the touch screen.
The short name or description for the camera is displayed at
the top and bottom of the RCP touch screen whenever that
camera is selected (page 10).
Installation and Setup
button to
29