Securing The Touch Screen To The Rcp - Canon BU 45 User Manual

Canon BU 45 Camera Control System User's Manual

Securing the Touch Screen to the RCP

The touch screen is attached to the rear of the RCP by means of the ball-and-socket
arm and clamps that are provided.
If the RCP is rack-mounted, the ball-and-socket arm is attached to the top of
the RCP instead of the rear.
1.
Loosely secure one end of the ball-and-socket arm to the rear of the touch
screen, using one of the clamps provided (Figure 9).
2.
Loosely secure the other end of the arm to the RCP, using the remaining
clamp.
3.
Adjust the height and position of the touch screen so that it can be
comfortably used, then tighten the upper and lower keys until the touch
screen remains in position when supported by the RCP.
Figure 8 Securing the Touch Screen to the Ball-and-Socket Arm
18
Ball-and-Socket Arm
Clamp
Key